How to Remove Junk Files and Speed up PC?

Over the course of your computer's lifetime, numerous junk files accumulate in hard disks. Those junk files are created every time you install or uninstall programs, surf the Internet, edit documents, etc. No one would love junk files left in their PC, because those files are eating up disk space, weakening your PC performance and pulling down working efficiency�they do nothing good. So, you may want to know how to identify junk files in our PC, and how to remove them. This article will point out five large sources of junk files, so you could identify and delete them safely.

Below five types of files can be identified as "junk files".

1. Temporary files created in the process of software installation: When software is installed, the extracting process would create temporary files. If the software program has design flaw or your system has problems, those temporary files, which end with the extension .TMP, will be left behind in hard disks.

2. Temporary files created from software running: Programs create temporary swap files primarily for backup. For example antivirus software or System Checks always generate temporary backup files, such as *.old, *.bak. Those files could amount to several hundred MB.

3. Files left after software uninstall: After you uninstall a software program, you would find that a lot of file remnants, such as file folders, and *.dll files, are still left behind in your hard disk and make your registry cluttered. That is because Windows cannot conduct a thorough uninstalling. Improper design of software program is also a cause for creating junk files.

In most time, computer users who are not skilled at software or computer would directly delete all the program files. In fact they get it wrong. The only outcome by doing in this way is to have even more junk files left behind. What's worse, the registry would become more cluttered or corrupted. A registry of deteriorated condition could only make computer overall condition decline.

4. Temporary Internet files: When you surf the Internet, Web browser downloads pages, graphics and stores user's browsing history on your computer. Those caches not only take up a lot of room on your disk, but are likely to leak our private information.

5. Rarely used files: For most people, there are some types of files you would rarely use, such as instruction files (usually their extension is .hlp) and excessive font files. When you run Corel DRAW on your PC, its numerous and useless inbuilt font files would substantially slow down the processing speed. It is strongly suggested to delete unnecessary files to speed up your computer.

Once you have identified the above five types of files, you can take action to delete! Perhaps you may regard this "Identify & Delete" method too complex or troublesome; there are actually many other ways, e.g. Windows clean or optimization software, to clean junk files. Among these specialized tools we would recommend "TuneUp Utilities". With its fast, accurate, thorough cleaning performance, your system will always be kept in a compact and organized condition.

Author - PCWatch

PC Optimization And Tune Up Tricks

Is your computer a few months old and already performing slower than before? This is a common problem as experienced by a number of users. But you no longer have to deal with this issue. PC optimizing is a convenient option now. With this, you can now speed up your old PC and get it to run like how it was when you first purchased it.

No, no technical experience required! You don't need to be a geek too. Just a few tips and tricks will work fine.

Let's explore!

Get Rid Of Unnecessary Software
There are a number of programs on your PC that you hardly use. And you would be surprised to know how they slow down your computer. So it is best to remove these to optimize your PC. One way of doing it is by going to Control Panel and removing the unwanted or unknown programs

Keep Windows Updated
Your computer probably automatically updates your Windows version. But if it doesn't, you would have to do it yourself. You can check for frequent updates on the System and Security page in the Control Panel. This will keep your computer updated and functioning well.

Free Up Disk Space
Not only programs and software, sometimes there are files that you don't need, but they get fixated in some corner of your computer. Taking help of a Free PC optimizer would come to your rescue under such circumstances. Using a good PC Cleaner Utility is a good idea here to remove these files. A lot of temporary files also get deleted in the process which really helps you free your total disk space.

Optimize Startup Programs
If you have too many programs running at startup, it might have really deteriorating effects on your computer speed. So, optimize your startup programs and keep only the ones you need by accessing them from Task Manager in the Startup tab.

Antivirus Scan
This is the one stop solution for a number of your PC problems, and believe us no PC optimizer is required. Just a reliable antivirus works fine. It is essential to scan your PC for malware regularly. But if your computer is running excessively slow, you could do a Full Scan on the Windows Defender that is preinstalled on the computer. This might be able to detect that one piece of malware slowing down your machine.

Hard Disk Defragmentation
Tune up your PC with hard disk fragmentation. Your computer might be defragmenting your hard disk on its own. But sometimes, you have to do it yourself. This can be achieved with the Disk Defragmenter tool or the �Optimize Drives' option. You can completely avoid the defragmentation process if your machine runs on a Solid State Drive.

PC Recovery And Restore Discs
Restoring your PC to its factory settings can help you get rid of problems like a slowing PC. This will literally put your PC like how it was when you had purchased it. Also, it is essential that you keep restore discs with the backup of your programs if you opt for a factory setting reset. With this disc, you can later get your programs back and your PC runs like new.

Didn't we say, this is easy?

Author - Shailendra Singh

7 ways to speed up your computer

How to speed up My Computer?

If so, there are tons of simple tasks and hardware upgrades that you can do to get your computer back to running at its top speed. Stop wondering why is my computer so slow. Listed below are 7 super effective ways to speed up your computer.

1 - Identify and remove malware

To start off with you'll want to make sure there isn't any hidden malware currently infecting your system. Even if you think there isn't, chances are some type of malware is hidden somewhere in your system. If you don't already have security software installed such as antivirus or internet security, your computer is most likely infected. Malware includes all malicious computer threats such as viruses, spyware, and adware.

Malware can really slow down your computer and you can't identify malware on your computer without the help of a decent security program. To identify and remove malware you'll need to run a full system scan using your security program. Once you've removed all hidden malware on your computer, you should also consider setting up an automatic weekly virus scan to run so you won't have to remember to do so yourself!

2 - Uninstall unnecessary programs

The more high memory programs you have stored on your computer, the less free hard drive space you'll have and the slower your computer will run. There are most likely at least a couple of unnecessary programs eating away at your computer's memory and performance. Even brand new computers come preinstalled with lots of bundled software crap that you really don't need or may ever use. Uninstalling any programs and services that you find unnecessary will really help to clear out the clutter and free up some extra memory on your hard drive.

3 - Eliminate startup services

You may not even realize it, but as soon as you hit the power button to your computer tons of random services and programs launch which you probably don't need slowing down the startup process. If you find yourself wondering why is my computer so slow during the startup process, eliminating unnecessary programs and services from starting up with your computer will do just that. Over time many programs and services are automatically added to the startup list which can tremendously slow down the startup process for your computer.

To eliminate startup programs and services using Microsoft Windows, navigate to the System Configuration window (windows key + R and type in msconfig) and click the Startup tab at the top. In Mac OS X, you can navigate to System Preferences, Accounts, and open LoginItems.

4 - Update device drivers

Every computer has a big list of drivers for every attached or installed device and over time those drivers will most likely become outdated. Most computers don't automatically update outdated drivers making this a separate task you'll have to take on yourself if you suspect your drivers are out of date. The quickest way to locate and install the newest drivers for your computer is with a simple Google search including your exact computer model name such as, drivers for HP TouchSmart 1050. You'll usually be able to download a complete driver package including all up to date drivers for your computer model on your computer manufacturers website.

5 - Reinstall or upgrade the OS

You probably aren't aware of all the unnecessary clutter that can accumulate over time and really slow down your computer. Sometimes the easiest and most effective solution to regain your computers top performance is to simply upgrade or reinstall the entire operating system. Upgrading to the latest OS edition will certainly provide the most effective speed boost, but reinstalling your current operating system will work just as well to give your computer a fresh start. Ideally, you should first back up only your most important files and documents to a separate secure location such as a flash drive or external hard drive, that way you can safely install the operating system and restore your files after.

6 - Add more RAM (random access memory)

RAM (random access memory) is basically like a turbo kit for your computer and is a physical hardware component that is easily upgradable. If you wonder why is my computer so slow whenever you have lots of open windows and/or programs open, adding more RAM to your computer can certainly allow you to run more powerful programs at once. Although working with a hardware component yourself may sound a little out of your comfort level, the RAM is one of the easiest hardware devices to replace. Since no data is ever permanently stored on the RAM, you can easily swap out and upgrade RAM in your system without worries of losing or damaging data. The more RAM your computer has, the more high memory programs you can run at once and the more powerful your system will become. 64-bit operating systems can support a whole lot more RAM compared to 32-bit systems which typically have a max RAM limit of 4 GB.

7 - Upgrade to a solid state drive (SSD)

If you're still using one of those old fashioned hard disk drives it's definitely time to upgrade to something a little faster. Solid state drives are much faster and more powerful compared to hard disk drives because they eliminate file fragmenting, meaning data can be loaded a lot faster and defragmenting the hard drive becomes a thing of the past.

Solid state drives are also entirely flash-based and contain no physical moving parts such as spinning discs or a moving read/write head. With traditional hard disk drives, the read/write head has to physically move around to access data which is stored in fragments. With solid states drives, no physical moving parts are required and you can access and load your data significantly faster. Tip: Installing the operating system directly onto a solid state drive can increase startup performance up to 8x.

How to Log on to PC If You Forgot Windows 7 Password

Windows Password could help people protect their important data that is stored in their computer. But many people are forgetful and easy to forget their password. So what should you do to log on to PC when you forgot Windows 7 password? show you 3 solutions.




Method 1: Reset Windows 7 Password with Password Reset Disk

A strong password can be easily forgotten or lost, creating a password reset disk is necessary. If you forget Windows 7 password, you can use the password reset disk to reset the password. With it, you can easily reset your Windows 7 password and log on to your PC in a minute.

Creating a password reset disk in case of forgetting password is necessary. But there are still many people forget to create one in advance. So it is highly recommend that creating a password reset disk when you create your logon password.

Method 2: Reset Windows 7 Password with Third-party tool

In addition to reset Windows 7 password with password reset disk, you can also reset the forgotten password with third-party Windows password reset software. Windows password reset software allows you to reset forgotten Windows 7 password by creating a bootable CD/DVD or USB flash drive. Here we suggest Rekeysoft Windows Password Recovery.

Rekeysoft Windows Password Recovery is professional Windows password reset tool. It provides you fast and secure way to reset forgotten password in any versions of Windows, including Windows 7/Vista/XP etc. You only need to create a bootable CD/DVD or USB flash drive.

Method 3: Re-install Windows 7 Operating System

If you cannot log on to computer with the methods above, you can re-install Windows 7. It is the last choice for you. Insert the Windows 7 installation disc into your computer and restart it. Once the computer is running, follow the onscreen instructions to re-install Windows 7.

The methods above are effective for you when you forgot windows 7 password. And they can be also useful when you forgot Windows password of Windows Vista and Windows XP. You can choose one of them when you lost of forgot Windows 7 password.

How to My Computer Shutdown at a Certain Time

Computer Shutdown at a Certain Time.

Generally, While Watching Movies, Downloading or Reading an eBook, I fall asleep. This must also be a case with many of you, Watching Movies on your Laptop and then lying asleep the Next Minute, with only ghosts left to watching your boring movie.

Many Download junkies also queue files for overnight downloading. And in places where an uninterrupted supply of electricity is not present, these poor download junks have to wake up early to switch off their PCs and avoid data corruption.

How to My Computer Set a Timer for Automatic Shutdown?

Setting up a timer for automatic shutdown is no big deal, in fact many people would already know about it, but if you don�t, read on.

There is no software to install and no tweaks to be made. An automatic shutdown is inbuilt into Windows and ready to be explored. Let�s check out how we can set a timer for automatic shutdown.


How to Set a Timer for Automatic Shutdown?

For example that you want to Shutdown your computer at 1:00 AM.

Then go to Start Menu and click on RUN then type "at 01:00 shutdown -s" and Press Enter.

Now your Computer Automatic Shutdown at 1:00 AM.

And other -s, -l, -t, -c, -f, -r Meaning.
-s
Shuts down the PC.

-l
Logs off the current user.

-t nn
Indicates the duration of delay, in seconds, before performing the action.

-c "Type your message in text"
Displays a message in the System Shutdown window. A maximum of 127 characters can be used. The message must be enclosed in quotation marks.

-f
Forces any running applications to shut down.

-r
Reboots the PC.

at 01:00 shutdown -s -t 50 -c "Bye Bye"

How to Deactivate Set a Timer for Automatic Shutdown?

You Set Time After ohh.. My Work is Long Time Running Not Finish at a Set Time. How to Deactivate Shutdown Mode.

To Deactivate this Mode go to RUN Again and Type "shutdown -a" and Press Enter.

Learn How To Diagnose Power Supply Problems

The Power Supply convert's your regular household current into low DC voltage used by the computer. When this component fails,there is simply no activity going on wih your computer. Remember to do the easy troubleshooting first. Inspect the Power Supply for any damage. Double-Check all connections.

Learning how to check your power supply and how to replace it when needed can be a life saver if you're a computer buff or in business with the trusted PC. Don't take for granted the simple pleasure of turning on your PC and everything works just fine.

We turned on one of our computers recently and in about one hour,it just re-booted itself. And it continued doing so about 10 times a day until we found out the power supply was the culprit. Things to look for when your power supply is going bad or just dies on you are the following.

NO POWER TO THE COMPUTER

Here you must first check the wall outlet for power by connecting another device such as a radio or lamp to be sure power is present. If the computer is connected through a surge protector, check it as well.

If the wall out has power, check the power cable going to the PC to see if AC voltage is making its way to the system unit. Do this with the use of a multimeter.

If there is power,you will have to open the PC and check for power from the power supply to the motherboard.

When using a multimeter to check voltage,be sure you have a good ground for the black lead of the multimeter.

RE-BOOTING PROBLEMS

One main problem you may face with an ailing Power Supply is that it may re-boot the computer without any warning. All information is lost and it seems as though this happens at the worst possible time.

Booting errors when the computer first start's up is another indicator of this component going on the blink.

POWER DISTRIBUTION PROBLEMS

When the power supply begins to fail, you may receive power at one device and not another. For example, the Hard Drive may receive power but the CDROM Drive has nothing at all.

Another headache with would cause re-booting is the intermittent power going to the drives or the motherboard itself. Follow the steps below to check your power supply should you experience some of the above problems.

CHECKING THE POWER SUPPLY

If the wall outlet, and the power cord are good, make sure the connection at the motherboard is secure. Then you may have to face the fact that the power supply itself is bad. If you have a Multimeter you can test the power supply output before purchasing a new one. Simply follow these steps.

Turn off the PC, but do not unplug it,open the system unit. Set the multimeter to read DC volts in the next range higher than 12 volts. Locate a power connector similair to the hard drive, or cdrom drive connector that is unused and turn on the PC.

You can also unplug a drive connector and use it as well. Turn on the PC and insert the BLACK probe into the power connector on one of the BLACK wires.Touch the RED probe to the YELLOW wire on the power connector.

The multimeter reading should be +12 volts Now touch the RED probe to the RED wire and the reading should be +5 volts.If no readings or different readings occured, you'll have to replace the power supply. If the readings were correct, you should check the P8 or P9 connectors at the motherboard. These connectors may also be named P4 and P5. To check these connectors, perform the following...

Insert the BLACK probe into P8 at one of the BLACK wires. Insert the RED probe into the P8 connector at the RED wire. The reading on the multimeter should be +5 volts

Check the power going to the Motherboard connections by inserting the RED probe into P8 at the YELLOW wire and you should get +12 volts.Leave the BLACK wire touching the black wire at the P8 connector.Check the BLUE wire and the reading should be a -12 volts.

Now move the BLACK probe to the BLACK wire on the P9 connector. Test the WHITE wire by inserting the RED probe and the reading should be -5 volts. Check the RED wires on the P9 connector and you should get +5 volts on each red wire. You won't get exactly 5 or 12 volts but the readings will be very close, such as 5.02 volts.

If the Power Supply is a couple of volts off, in either direction, such as when the RED wire should be reading -5 volts but it reads -8 volts, or if there are no readings, replace the power supply.

DO NOT remove the power supply from the system unit case when performing these tests. DO NOT perform these tests if you do not feel comfortable. Be sure to remove any and all electrical static build-up from your clothes and body BEFORE touching any parts inside the system unit.And NEVER open the power supply case for any reason, since high voltage may be present.

The Seven Golden Rules Of Data Backups

The Seven Golden Rules Of Data Backups



Backups of company data are carried out for two main reasons. The first is to cater for those times when a document is inadvertently deleted or damaged and you wish to recover the original document; the second is as part of a disaster recovery plan in case something catastrophic happens to your computers (e.g., victims of a fire or theft).

Backups cost time, money and effort to implement, and they are of no value right up until the time you need them. This means they tend to be given a low priority, but ultimately they may easily represent the difference between your business surviving and failing. In this TipSheet, we look at the most common mistakes businesses make with backups.

1. Backup often

Re-entering data is tedious and frustrating. Backing up your company data once a week means that the most you should ever have to re-input is one week's worth Backing up your company data once a day means the most you should ever have to re-input is one day's worth. Frequent backups lessen the impact of data loss.

2. Don't keep any volatile data on desktop PCs

In many organisations, documents are kept on the hard drive of desktop PCs. It is unlikely that this is backed up regularly, if at all. A PC can easily be replaced: last week's quotations may not be so easy to replace. In particular, check that email is not stored on the local hard drive (this is very common in small to medium size businesses). All documents, spreadsheets, email, etc should be kept on a central server, which is in turn backed up regularly.

3. Automate the backup process

Backups are tedious to do. At 6:30pm, most people would prefer to set off home or join colleagues in the bar rather than stay in the office to find the correct tape and start a backup. Automating tedious tasks means they get done.

4. Monitor the backup process

While automating backups is a good idea, do check that they are running correctly. Make sure new files are being backed up; make sure the files of new users are being backed up. A quick check once a week could avert a much more serious problem later.

5. Keep backups offsite

If your business premises suffer a fire or flood, it is likely that backup media will be lost as well. Fireproof safes only protect media for a given time, typically one hour - if you use one, check the manufacturer's specification. If you always keep your backup tape in the server then when it is stolen the thief will probably throw the tape away. It's worth nothing to him, but it could represent bankruptcy to you.

6. Produce a "backup recovery" manual

A major disaster is not the time to try to remember how to recover data from your backup media. Have an idiot-proof, step-by-step procedure written - with a copy stored off-site - detailing how to reinstate your company data.

7. Test the recovery procedure periodically

Without warning, give the backup recovery manual to a member of staff and see how long it takes them to recover data. Many organisations never do this! No one involved with creating the manual or the backups themselves should be involved in the test. The results of the test should be analysed and the manual updated accordingly. A recovery test should be carried out at least twice a year. This proves both that the backups themselves are usable, and that your organisation understands how to use them if necessary.

Choosing The Best Printers For Laptops

Printing technology has changed drastically in the past few years. There is a lot of stiff competition among printers as new products are being introduced in the market every often. With many manufacturers out there, finding good quality printers for laptops has been made easy. The problem is that there is an influx of low quality products out there. These products are offered at low cost to attract more consumers.

The good thing is that improvement of printing features has also increased its production. What is more, these copiers are available to consumers worldwide. Portable printer is much tougher today than previous technologies. Reason is that they are much classier and combine several features to ensure they perform faster. There are many types of portable printer to choose from in the market nowadays.

Portable printer is available in a number of options. The most commonly used are wireless printer, laser printer and the wired printer. Wireless printer is one of the cheapest and it embraces USB infra-red technology to transfer data from computer to printer. The USB is connected to the printer through a tiny port on the side of the laptop or computer. USB is a very tiny device and lightweight, something that makes it easily portable. Such features are quite appealing nowadays.

This printer presents fast service and comes at an affordable price to consumers. Laser petite printer is the fastest of all the copiers. This technology is much more precise and has proven to be effective compared to other technologies in use. With quick printing qualities, user can print quite a number of papers in few seconds without problem. Laser petite printer is available in wireless technology nowadays.

Portable laser printer that uses wireless technology is relatively more expensive than other types of printers. Manufacturers combine these two features to give individuals more reason to use them. One benefit of using combined features is that the prints produced are quality. Wireless laser printer is very popular today since they allow users to enjoy a multitude of features at a cheaper cost.

Portable printer is available in computer shops, retail shops and also in many electronic shops. Individuals can also choose to purchase them from internet stores. The cheapest option is to buy them from manufacturer exhibition rooms. Purchasing them from internet shops and showrooms allows individuals to save on cost.

Internet shops are the best option for consumers looking to save a few dollars. Most internet stores purchase their products directly from manufacturers. Therefore individuals purchasing these products can be assured from buying quality products. Reason why internet stores are preferred is that they allow users to pay using their credit cards. For genuineness purposes, individuals should ensure they get warranty for the products they purchase.

If considering purchasing printers for laptops, take time researching. Do not make hasty decision about it. This is a huge investment because it will be used to produce important documents. Visit several stores, compare and contrast services before making final decision.

Windows Logo Key Keyboard Shortcut for Windows 7

Windows Logo Key Keyboard Shortcut for Windows 7






Windows 7 keyboard shortcut to simplified working in windows 7. (Only for windows logo key keyboard shortcut)





Use 30 Windows 7 keyboard shortcut.

1. Windows logo key : Open or close the Start menu.
2. Windows logo key + Pause : Display the System Properties dialog box.
3. Windows logo key + D : Display the desktop.
4. Windows logo key + M : Minimize all windows.
5. Windows logo key + Shift + M : Restore minimized windows to the desktop.
6. Windows logo key + E : Open Computer in windows explorer
7. Windows logo key + F : Search for a file or folder.
8. Ctrl + Windows logo key + F : Search for computers (if you're on a network).
9. Windows logo key + L : Lock your computer or switch users.
10. Windows logo key + R : Open the Run dialog box.
11. Windows logo key + T : Cycle through programs on the taskbar.
12. Windows logo + number :Start the program pinned to the taskbar in the position indicated by the number. If the program is already running, switch to that program.
13. Shift + Windows logo key + number : Start a new instance of the program pinned to the taskbar in the position indicated by the number.
14. Ctrl + Windows logo key + number : Switch to the last active window of the program pinned to the taskbar in the position indicated by the number.
15. Alt + Windows logo key + number : Open the Jump List for the program pinned to the taskbar in the position indicated by the number.
16. Windows logo key + Tab : Cycle through programs on the taskbar by using Aero Flip 3-D.
17. Ctrl + Windows logo key + Tab : Use the arrow keys to cycle through programs on the taskbar by using Aero Flip 3-D.
18. Ctrl + Windows logo key + B : Switch to the program that displayed a message in the notification area.
19. Windows logo key + Spacebar : Preview the desktop.
20. Windows logo key + Up Arrow : Maximize the window.
21. Windows logo key + Left Arrow : Maximize the window to the left side of the screen.
22. Windows logo key + Right Arrow : Maximize the window to the right side of the screen.
23. Windows logo key + Down Arrow : Minimize the window.
24. Windows logo key + Home : Minimize all but the active window.
25. Windows logo key + Shift+Up Arrow : Stretch the window to the top and bottom of the screen.
26. Windows logo key + Shift + Left Arrow or Right Arrow : Move a window from one monitor to another.
27. Windows logo key + P : Choose a presentation display mode.
28. Windows logo key + G : Cycle through gadgets.
29. Windows logo key + U : Open Ease of Access Center.
30. Windows logo key + X : Open Windows Mobility Center.

How to Create Partition in Windows 7?

How to Create Partition in Windows 7?




How to create hard disk partition in Windows 7? Follow This 15 step:







1. Click Windows icon and Click Control Panel
2. Click on System and Security.
3. Click on Administrative Tools.
4. Double Click on Computer Management.
5. Click on Disk Management.
6. Left Click on partition that you want to re-size (shrink or extend).
7. Want to shrink volume of disk 0 on "C" partition, so click shrink.
8. Enter the amount of space to shrink, windows 7 already give maximum size to shrink, so we can only reduce the size.
9. Click shrink.
10. Now we have unallocated disk space to create a partition, left click on unallocated disk space and click new simple volume.
11. Wizard for creating new simple volume will appear, just click next.
12. Type size of partition we want to create, and click next.
13. Assign drive letter for partition, and click next.
14. Choose format of partition (choose NTFS), and don't forget to choose "perform a quick format" to format partition quickly, and click next.
15. Click finish to complete creating partition, and new partition already create.

I hope this tutorial can help everyone to create partition in window 7. You Confused? Feel free to ask Your feedback is always appreciated. I will try to reply to your queries as soon as time allows.

Clean Your MotherBoard

How to Clean your Case, now is the time to do so. Look at the blades of the fan in the back of the computer. Also look at any vents. Is there clusters of dust there? Is there grime caked on to it? If so, the inside needs to be cleaned. If the fan blades are clean but it has been several years since you have cleaned the motherboard or if the computer is around cigarette smoke, it probably should be cleaned anyway. Dust and particles in the air can build up on the circuitry of the motherboard and cause it to heat up and/or corrode.

The first thing that you need to do is unplug your computer. Then open up the case to get access to the motherboard. Cases open differently. If you don't know how to open your case, look on the back of your computer along the edge for some screws. These screws may hold on side panels or an upside down U shaped panel that covers the sides and top. Removing the screws will allow you to take off the cover. Other cases have the screws on the front of the computer. To get access to these screws, you must first remove the front panel by pressing a hidden latch. The cover is there to give easy access to the inside of your computer, so if you look hard enough, you should be able to figure out how to remove it.

Remember that if you touch anything on the motherboard, you should be grounded by either touching the metal frame of the computer with your other hand or by wearing a special grounding device.

The goal of cleaning the motherboard is to remove all dust and debris from the motherboard and all components inside of the case. This can be done using one of three methods.

The preferred method is to use a can of compressed air to blow it out. Always hold the can in an up-right position to prevent the propellent chemicals which can damage or corrode components from coming out. Dust and dirt should be blown away from the motherboard and out of the case.

Another way to remove dust is to use a vacuum. The common advice is to only use a battery operated vacuum because an AC powered vacuum causes static and static can ruin the motherboard. I have used an AC powered vacuum (before I knew that it was not recommended) to clean my motherboard many times and it has never caused any problems, but I may have just been lucky. When using the vacuum, keep the nozzle a couple of inches away from the motherboard or any other components so that it does not come in contact with them and so that any small parts are not sucked into the vacuum.

If you do not have a can of compressed air or a vacuum, you can use a dry cloth and brush to clean the motherboard. Be careful not to dislodge or break anything using this method.

While cleaning the motherboard, be careful not to unplug any cables or connections or to dislodge any loose components, such as, jumpers.

Methodically clean the whole inside of the case going over all of the motherboard from one end to the other and all other components. Don't forget to clean the fans and heat sinks. Do not open up the power supply box or stick anything in it beyond the fan. If you do, you could get a shocking surprise and ruin your computer.

If your computer does not work when you put it back together, something was obviously dislodged during the cleaning. Open the case back up and push all connections and cards into their slots. Look for anything that may have become disconnected.

Cleaning the motherboard is probably the most dangerous form of cleaning but it is necessary to prevent an early death of your computer.

Upgrade Laptop RAM

This tips is set up in two parts, one part about RAM overview and a second part about RAM upgrade. If you are curious on how the RAM works, you will find a detail summary that should give you all the information that you need to know about RAM, organization and speed. If you just want to read the how to upgrade section, move on directly to part two Upgrade your laptop ram in 5 minutes or less.

1 � RAM Overview

There are two big categories of random access memories:

Dynamic memories (DRAM, Dynamic Random Access Module), not very costly. They are in most cases used for the central memory of the computer

Static memories (SRAM, Static Random Access Module), quick and expensive. SRAM is notably used for cache memories of the processor

Functioning of the random access memory

The random access memory is constituted of hundred of thousand small condensers storing charges. When it is loaded, the logical state of the condenser is equal to 1, otherwise it belongs to 0, what means that every condenser represents one bit of memory.

Given that condensers off-load, it is always necessary to recharge them in a space of regular time called cycle of refreshment. Memory DRAM requires cycles of refreshment for instance (Ns) is about 15 nanoseconds.

Every condenser is coupled with a transistor allowing to "recover � or to change the state of the condenser. These transistors are lined up in form of matrix, that is they achieve a hut memory (so called memory) by a line and a column.

So, for a memory of type DRAM, the time of access is of 60 nanoseconds (35ns of delay of cycle and 25 ns of time of latency). On a computer, the time of cycle corresponds contrary to the frequency of the clock, for instance for a computer pulsated in 200 MHz, the time of cycle is 5 ns (1 / (200*106)).

As a result a computer having a frequency well brought up and using memories the time of access of which is much longer than the time of cycle of the processor must perform cycles of wait to access to the memory. In the case of a computer pulsated in 200 MHz using memories of types DRAM (which the time of access is of 60ns), there are 11 cycles of wait as a cycle of transfer. The performances of the computer are of as much diminished as there are cycles

Formats of Random Access Memory (RAM)

There are numerous types of random access memories. These all come in the form of barrettes of memory attachable on the motherboard.

SIMM (Single Inline Memory Module): it is about printed circuits among which one of the faces has fleas of memory. There are two types of barrettes SIMM, according to the number of connector cables (30 or 72)

DIMM (Dual Inline Memory Modulates) are from memories 64 bits, what explains why it is not necessary to match them. Barrettes DIMM have fleas of memory on both sides of printed circuit and have also 84 connector cables on each side, what endows them with a total of 168 brooches. They have bigger dimensions than barrettes SIMM (130x25mm).

RIMM (Rambus Inline Memory Module, conscripts also RD-RAM or DRD-RAM) are from memories 64 bits developed by the society Rambus. They have 184 brooches. These barrettes have two notches of location (d�trompeurs), avoiding very risk of confusion with the previous modules. Considering their well brought up speed of transfer, barrettes RIMM have a thermal film made responsible for ameliorating the clearing up of warmth. As in the case of DIMM, there are modules of smaller size, called SO RIMM (Small Outline RIMM), intended for laptop computers. Barrettes SO RIMM include only 160 brooches.

DRAM (Dynamic RAM, dynamic RAM) is the type of memo most spread at the beginning of the millennium. It is about a memory from which transistors are lined up in a matrix according to lines and of columns. A transistor, coupled with a condenser gives the information of a bit. 1 byte consisting of 8 bits, a barrette of memory 256 Mb DRAM will contain 256 therefore * 2^10 * 2^10 = 256 * on 1024 * on 1024 = 268 435 456 bytes = 268 435 456 * 8 = 2 147 483 648 bits = 2 147 483 648 transistors. A 256 Mb barrette has so in reality a capacity of 268 435 456 bytes, that is 268 Mb! These are memories from which the time of access is 60 ns. On the other hand, accesses memory are made in general on data lined up consecutively in memory. So the mode of access in gust (burst mode) allows to achieve the three successive data in the first one without time of additional latency.

DRAM FPM to speed up accesses to DRAM, there is a technology, called pagination consisting in achieving data located on the same column by changing the address of the line only, what allows to avoid the repetition of the number of column between the reading of each of the lines. They speak then about DRAM FPM (Fast Page Mode). FPM allows to acquire time of access in the order of 70 - 80 nanoseconds for a frequency of functioning that can go from 25 to 33 Mhz.

DRAM EDO (Extended Data Out, Goes out of data ameliorated sometimes also called "hyper-page") appears in 1995. The technology used with this type of memory consists in addressing the following column during the reading of the data of a column. It creates an overlapping of accesses allowing to save time on every cycle. The time of access to memory EDO is therefore about 50 - 60 nanoseconds for a frequency of functioning going 33 - 66 Mhz. So, RAM EDO, when it is used in mode gust allows to acquire cycles of form 5-2-2-2, that is a benefit of 4 cycles on the access to 4 data. As much as memory EDO did not accept the upper frequencies in 66 Mhz, it disappeared in aid of SDRAM.

SDRAM (Synchronous DRAM, translate synchronous RAM), appeared in 1997, allows a reading of data synchronized with the bus of the card-mother, contrary to memories EDO and FPM (qualified as asynchronous) having their own clock. SDRAM allows therefore to free itself from time of wait owed to synchronization with the card-mother. This one allows to acquire a cycle in mode gust of form 5-1-1-1, that is to say benefit of 3 cycles in comparison with RAM EDO. In that way SDRAM is able of working with a cadenza going until 150 Mhz, allowing him to acquire from time of access about 10 ns.

DR-SDRAM (Direct Rambus DRAM or else RDRAM) is a type of memory allowing to transfer data on a bus of 16 wide bits to a cadenza of 800Mhz, what confers on him a band passer-by of 1,6 Go / s. As SDRAM, this type of memory is synchronized with the clock of the bus to ameliorate exchanges of data.

DDR-SDRAM (Double Dated Miss SDRAM) is a memory based on technology SDRAM, allowing to double the rate of transfer of SDRAM with equal frequency. Reading or writing of data in memory am accomplished on the basis of a clock. Standard memory DRAM uses a method conscript SDR (Single Data Fails) consisting in reading or writing data in every forehead going up. DDR allows to double the frequency of reading / writings, with a clock pulsated in the same frequency, by sending data in every forehead going up, as well as in every downward forehead. Memory DDR has in general a commercial appellation of type PCXXXX where "XXXX " represent the debit side in Mb / s.

DDR2 (or DDR-II) allows to attain twice as well brought up debit sides as DDR with equal external frequency. They speak about QDR (Quadruple Dated Fail or quad-pumped) to indicate the method of reading and used writing. Memory DDR2 uses in effect two channels separated for reading and for writing, so it is able of sending or of accepting twice more data than DDR.


2 - Upgrading Your Laptop RAM
upgrading a notebook memory is a specific simple process pending that you have the right RAM and are somewhat delicate.

There are different types of RAM, and you must choose the one that is compatible with your notebook computer. Memory is also a fragile, so you need to be very cautious when installing it. You should ensure that the laptop is turned off and disconnected from any exterior power supply. No lights should be visible.

It is a lot easier to install RAM on a laptop versus a desktop PC. Access to the memory slots is via a panel generally located in the bottom of the laptop. Once you have opened this panel with a small screwdriver you can see the existing memory. you can check the exact type of memory that your Notebook currently uses, because it is usually shown on the front of the memory strips and will be evident when you open up the memory panel.

The memory strips are generally locked in with small clips on the ends of the strips. To take out existing memory, simply flip the clips and then remove the memory strips gently from their holding place. If you are simply adding memory, and there is space available, just add the new memory, gently pushing it in to ensure it is fully seated in the slots, and then push the clips to hold the new memory in place.

Once you have replaced or added your Notebook computer memory, replace the access panel, and then screw the panel back in place. Lastly, power up the notebook, When the PC starts up, it will count the memory and tell you how much RAM is loaded on your laptop.

As long as you have right memory, the whole operation should take less than 5 minutes, you can then enjoy your faster, less crash prone laptop.

Top 10 Tips Improve Windows XP Performance

Some Time Pc is very loading. use this trick after your pc is good working. Follow This 10 Step:

1.) Disable file indexing. The indexing service extracts information from documents and other files on the hard drive and creates a "searchable keyword index." As you can imagine, this process can be quite taxing on any system. The idea is that the user can search for a word, phrase, or property inside a document, should they have hundreds or thousands of documents and not know the file name of the document they want. Windows XP's built-in search functionality can still perform these kinds of searches without the Indexing service. It just takes longer. The OS has to open each file at the time of the request to help find what the user is looking for.

Most people never need this feature of search. Those who do are typically in a large corporate environment where thousands of documents are located on at least one server. But if you're a typical system builder, most of your clients are small and medium businesses. And if your clients have no need for this search feature,
I recommend disabling it.

1 double-click the My Computer icon.
2 right-click on the C: Drive, then select Properties.
3 Uncheck "Allow Indexing Service to index this disk for fast file searching." and click Apply button
4 Check at "Apply change to C:\, subfolders and files" and click OK.
If a warning or error message appears (such as "Access is denied"), click the Ignore All button.

2.) Once a month, run a disk cleanup. Here's how:

1 Double-click the My Computer icon.
2 Then right-click on the C: drive and select Properties.
3 Click the Disk Cleanup button
4 Check at Temporary files and click OK.

3.) Remove all spyware from the computer. Use free programs such as AdAware by Lavasoft or SpyBot Search & Destroy. Once these programs are installed, be sure to check for and download any updates before starting your search. Anything either program finds can be safely removed. Any free software that requires spyware to run will no longer function once the spyware portion has been removed; if your customer really wants the program even though it contains spyware, simply reinstall it. For more information on removing Spyware visit this Web Pro News page.

4.) Remove any unnecessary or unused programs from the Add/Remove Programs section of the Control Panel.

5.) Turn off any and all unnecessary animations, and disable active desktop. In fact, for optimal performance, turn off all animations.
Windows XP offers many different settings in this area. Here's how to do it:

1 Click Start button , Setting and Control Panel
2 Double click on System icon
3 Click on the Advanced tab. and Select the Settings button located under Performance.
4 Feel free to play around with the options offered here, as nothing you can change will alter the reliability of the computer - only its responsiveness.

6.) Visit Microsoft's Windows update site regularly, and download all updates labeled Critical. Download any optional updates at your discretion. You Visit How to Update My Computer?

7.) Update the customer's anti-virus software on a weekly, even daily, basis. Make sure they have only one anti-virus software package installed. Mixing anti-virus software is a sure way to spell disaster for performance and reliability.

8.) Do not partition the hard drive. Windows XP's NTFS file system runs more efficiently on one large partition. The data is no safer on a separate partition, and a reformat is never necessary to reinstall an operating system. The same excuses people offer for using partitions apply to using a folder instead.

For example, instead of putting all your data on the D: drive, put it in a folder called "D drive." You'll achieve the same organizational benefits that a separate partition offers, but without the degradation in system performance. Also, your free space won't be limited by the size of the partition; instead, it will be limited by the size of the entire hard drive. This means you won't need to resize any partitions, ever. That task can be time-consuming and also can result in lost data.

9.) If the PC has a CD or DVD recorder, check the drive manufacturer's Web site for updated firmware. In some cases you'll be able to upgrade the recorder to a faster speed. Best of all, it's free.

10.) At least once a year, open the computer's cases and blow out all the dust and debris. While you're in there, check that all the fans are turning properly.

Remove MSN Messenger 3 Way

How to Remove MSN Messenger?
Follow This Staps:

1rd way:
The following method works in Windows XP Professional, but
has not been tested on a system with SP1 installed. FYI, I've seen scripts that are
similar to this, but fail miserably, automatically deleting other much-needed
components! Better to do this slow and manually!

1. Exit MSN Messenger by right-clicking the MSN icon in the notification area, and
selecting Exit.
2. Add the following registry entries, both with a DWORD value of 1:

a. HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Messenger\Client\PreventRun
b. HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Messenger\Client\PreventAutoRun

3. Open a command prompt by clicking Start/Run, then typing "command" and clicking OK.
4. Uninstall MSN Messenger by typing "rundll32 advpack.dll,LaunchINFSection %systemRoot%\INF\msmsgs.inf,BLC.Remove"
5. Uninstall the leftover installation information file by typing
"rundll32 setupapi,InstallHinfSection BLC.Remove 128 %systemRoot%\INF\msmsgs.inf"
6. Allow MSN Messenger to be displayed in the Add/Remove Windows Components dialog
in the future (if it pops up again!)
by typing "notepad.exe %systemRoot%\INF\sysoc.inf" and deleting the word "hide" from the
line that starts with "msmsgs=".
It MAY be possible to skip to this step directly and perform the uninstallation directly from
the Add/Remove Windows Components dialog, but that method MAY leave unwanted
components and has not been thoroughly tested.
7. Cross your fingers and reboot! You will probably get a message asking you to confirm the
removal of some leftover files. Click OK.

2th way:
There Is a way to uninstall Messenger cleanly. I don't know if these steps apply for Home version.
1. Control PanelAdd Remove Programs click on "add remove windows components" on the left hand side.
In the box that pops up...scroll down to the bottom and highlight "windows messenger" then UNcheck the box.
2. Hit next and let the uninstall complete. (it's not a very obvious un-install) When it's, done make sure you
to RESTART WINDOWS! (the messenger icon will still be in the tray if you don't!)

3th way
1. First, right click the Messenger icon in the system tray and click Exit.
2. Right click the Start button and click the Explore command to open the Windows Explorer.
3. In the Windows Explorer, expand the Program Files folder on the partition where your operating
system is installed (the partition that holds the WINDOWS directory) and right click the Messenger
folder and select Rename.
4. Rename the folder to MessengerDISABLED and press ENTER to commit the name change.
5. Restart the Computer. No more Windows Messenger

Stop Windows Error Blue Screen

Sometimes it just keeps happening over and over again and usually without any warning. Unfortunately when your computer shows up with a blue screen it will usually be set to automatically shutdown the computer or sometimes restart it. This makes many people panic because they cannot see, or even have time to write down all of the information on that particular blue screen.

Stop the Windows error blue screen on your screen and stopping it from restarting can be done in all Windows versions. I do not use Windows XP at the moment, however I am sure that this option exists in that operating system as well. The screen shots I have taken below are from Windows Vista, but Windows 7 is very similar to this.

How to stop the Windows error blue screen:
Follow this step:

1. Go to My Computer on Display and Right Click on My Computer Icon.

2. Click on Properties.

3. Now the systems properties will open. Click on Advanced Tab.

4. Under the Startup and Recovery section, press on settings.

5. The start up and recovery box will appear. Go to the System Failure section.

6. Uncheck the box where it says Automatically restart.

7. Press ok to finish.

Rename recycle Bin

How to Remane Recycle Bin?

1. Start, Run, 'Regedit'.

2. Press 'Ctrl'+'F' to open find box and type 'Recycle Bin' to search.

3. Change any value data with 'Recycle Bin' to whatever name you want to give it ( ie, like 'Trash Can' or 'Dump' etc).

4. Press F3 to continue searching for 'Recycle Bin' and change wherever you come across 'Recycle Bin' to new its new name.

5. Repeat step 4 until you have finished with searching and changed all values to its new name.

6. Close regedit and hit F5 on desktop to see the new name on screen.

Note: As a good practice, always backup your registry before changing anything although changing 'Recycle Bin' name is a simple tweak and doesnt affect anything else.

Securing XP

1. NTFS Partition.
2. Disable Error Reporting
3. Disable Automatic Updates (only if your XP copy is pirated)
4. Disable "Recent Documents" Viewed
5. Setup XP Firewall
6. Setup screensaver password
7. Setup BIOS password
8. Setup "AfterBios" login password
9. Account Modifications
-Rename Admin Account
-Disable Guest Account
-Disable Help_Assistant Account
-Disable Support Account
10. Install a virus scanner.
11. Change Login Screen (default shows usernames)
12. Disable Remote Registry (and other services)
13. Disable/Change Auto-Search settings in IE.

1. NTFS Partition.
Be sure to install XP onto an NTFS partition so that you (the admin) can take advantage
of file permissions. You want this option so that "you" can decide who reads, writes,
executes what files.

If you didnt install XP onto an NTFS partition. Convert It. To convert to NTFS follow
the instructions below.

Open a command prompt and type "convert c: /FT:NTFS /v"
This command will convert your c: partition from FAT to NTFS in verbose mode.

2. Disable Error Reporting.
we dont want microsoft to know everytime we fuck up. especially if we didnt pay for winxp.

control panel > performance and maintenance > system > advanced > error reporting (disable all) right click "my computer" > manage > services and applications > services > " stop and disable" Error Reporting.

3. Disable automatic updates.
To update, they must know what we have. thats a NO NO!

NOTE: DO THIS ONLY IF YOUR COPY OF XP IS PIRATED!! I suggest "auto update" if your copy of XP is legal. If your copy is pirated then i suggest that you stay updated with the latest fixes and patches manually.

control panel > performance and maintenance > system > automatic updates (disable updates)

right click "my computer" > manage > services and applications > services > " stop and disable" Automatic Updates.

4. Disable "Recent Documents" Viewed.
Quit listing most recent documents opened under the start button.

control panel > appearance and themes > task bar and start menu > start menu >
customize > advanced

remove the checkmark next to "List my most recently opened documents".

5. Setup XP Firewall.
Before this change, i scanned my xp box and found it to have many ports wide open. After this change, I found nothing and xp logged the attempts in c:\windows\pfirewall.log.

control panel > network connections > right click "local area connection" > properties
> advanced > check the box under "Internet Connection Firewall" then choose "settings".

Services Tab - leave all unchecked unless there is a service you are running that people
must be able to access.

Logging Options - Log everything.

ICMP - I left all these unchecked for the time being. (allowing nothing)

(this does not protect you from "Spy Ware". This only stops traffic from coming into
your win-xp box (not all traffic). It does not stop traffic from going out.) If you
need to stop traffic from going out and need a more secure firewall then download a real
firewall like "zone alarm or black ice".

6. Setup screensaver password.
Setting a screensaver password incase you leave some of that secret pr0n open when you walk away.

right click on the desktop > properties > screen saver > check the box next to " On
Resume, Password Protect."

If you dont have a password set on your user account, you can do so in control panel >
user accounts > change account.

7. Setting a BIOS password.
We dont want anyone rebooting the computer or trying to sneak into our pr0n while we are away at school or work.

I cant explain to one how this is done due to the differences between all computers and
how the BIOS settings are entered. If you know what Im talking about then do it. If you
dont know what Im talking bout then learn how to do it. A screensaver password is useless
unless you setup a BIOS password.

8. Setting up the "AfterBios" password.
Sometimes bios passwords are easily cracked. This password will add extra local login security incase your bios pass is crax0red. I dont know bout you but i love having to type in 3 passwds and a username to login to my box.

Start > run > type "syskey" > choose "update" > choose "Password Startup" > enter a
password and choose ok.
9. Renaming and Disabling Accounts for adminstrator, guest, help_assistant and support.
Right click my_computer > manage > local users and groups
rename administrator account
disable guest account
disable help_assistant account
disable support account

10. Install Virus Protection.
Install a virus scanner. Your firewall might protect your system from unwanted hackers but
what about an unwanted virus or trojan?. I recommend installing a virus scanner such as
"Nortons" or "McAfee".

11. Change Default Login Screen.
Xp uses the "welcome screen" by default. This screen has the names of all accounts on the
system so that the user only has to click on their name and type a password. Come on now....
We arent that damn lazy. If we change this screen to the normal login, then prying eyes
will have to know a username and password to get in. Follow the instruction below to change
this.

control panel > user accounts > change the way users log on or off

uncheck the box next to "Use Welcome Screen" and choose "apply options".

12. Disable Remote Registry.right click "my computer" > manage > services and applications > services > " stop and disable" Remote Registry.

NOTE: disable any services running in this area that you arent using.

13. Disable/Change Auto-search in Internet Explorer.
This is not really a security risk but it is important to some people that prefer to keep their internet surfing to themselves and away from microsoft.

Open Internet Explorer > Click the "search" button > click the "customize" button > click
"autosearch settings" > FOLLOW INSTRUCTIONS BELOW...

DISABLE: In the "When Searching" drop down menu, select "Do not search from the address bar". > click "ok" > "ok". Type an invalid address in your address bar and see if it
takes you to the msn search page or if it gives a "page not found" error. In this
case, the "page not found" error is what we want.

CHANGE: If you wish not to disable, but you wish to change it to your favorite "google.com"
search page. Instead of following the "DISABLE" instructions, follow the instructions
below. Choose "Google Sites (or whatever you prefer)" from the "choose a search provider
to search from address bar" drop down menu > click "ok" > "ok"

Update My Computer

How to Updating your computer?

What are updates?
Microsoft offers important updates, which include security and other critical updates, to help protect your computer against new viruses and other security threats that can spread over the Internet or a network. Other updates contain enhancements, such as upgrades and tools that can help your computer run more smoothly.

Update your Computer Follow This Steps:
1. Click Start, and then click Control Panel.

2. Depending on which Control Panel view you use, Classic or Category, do one of the following:
Click System, and then click the Automatic Updates tab.
Click Automatic (recommended) Option and select the day and time you want Windows to install updates. (Your Select Time Every Day 3:00 AM. Your Computer Update Every Day 3:00 AM)
Click Apply -> OK.

Adjusting your cookie security policy

How to Adjusting your cookie security policy?
If you do not want your computer to accept third-party cookies so that marketing companies cannot identify what ads they have shown you, or if you just want to adjust your cookie acceptance settings, then follow these steps:

1. Open Internet Explorer.

2. Click the Tools menu bar item and select Internet Options.

3. Click on Privacy tab.

4. You will see the up and down slider that allows you to select different levels of cookie security. I recommend that you bypass this and just click the Advanced button instead.

5. Once you click the Advanced button and see the Advanced Privacy Settings window, check the box that says Override Automatic Cookie Handling.

6. Your settings for first- and third-party cookies will now be available for adjustment. I recommend that you always accept first-party cookies. You can decide if you want to block or select the prompt to accept third-party cookies. Prompt will pop up a dialog box notifying you that a cookies request has been received.

7. Once you are finished with your settings, click the OK button to save your changes and return to Internet Options.

8. Click OK once more to close Internet Options.

Now that you have set the cookie privacy setting manually. you can eliminate cookies from being stored on your hard drive in the first place. Doing so will allow you to protect your privacy and still be able to use Web sites that need cookies.

Speed Up Bandwidth

How to Speed Up Bandwidth?

Windows uses 20% of your bandwidth Here's how to Get it back

A nice little tweak for XP. Microsoft reserve 20% of your available bandwidth for their own purposes (suspect for updates and interrogating your machine etc..)

Here's how to get it back:

Click Start ->Run -> type gpedit.msc

This opens the group policy editor. Then go to:

Local Computer Policy ->Computer Configuration ->Administrative Templates ->Network ->QOS Packet Scheduler ->Limit Reservable Bandwidth

Double click on Limit Reservable bandwidth. It will say it is not configured, but the truth is under the 'Explain' tab :

"By default, the Packet Scheduler limits the system to 20 percent of the bandwidth of a connection, but you can use this setting to override the default."

So the trick is to ENABLE reservable bandwidth then set it to ZERO.

This will allow the system to reserve nothing, rather than the default 20%.