If you want to keep your PC in good health, you need to monitor the system resources. Since we now do lots of stuff with our Windows computers, monitoring system resources becomes an important thing. Knowing the peaks of your computer’s capabilities and limitations can be a lifesaver in several situations.
So, if you want to utilize your computer at its full potential without damaging or overheating it, then you need to monitor CPU temperature as well. In this article, we will share a list of the best CPU temperature monitor software for Windows 7, Windows 8, and Windows 10.
Best CPU Temperature Monitor Tools For Windows
It’s worth noting that there are plenty of CPU temperature monitoring tools available for Windows PC, but not all of them work. So, in this article, we have listed the tools which work and worth your attention.
1. Open Hardware Monitor
Open Hardware Monitor is one of the best and top-rated Windows 10 software to check the temperature and various other aspects of the CPU. The software has a very clean interface, and it’s incredibly lightweight. With Open Hardware Monitor, you can monitor voltage, fan speeds, and clock speeds as well. Apart from that, it tells a lot about your Motherboard and Graphics unit also.
2. CPU Thermometer
CPU Thermometer is another best CPU monitoring tool on the list which works with AMD and Intel processors. The great thing about the CPU Thermometer is that it shows the CPU cores and their temperature. Not only that, but the CPU Thermometer also shows the CPU load capacity for each core as well.
3. Core Temp
If you are searching for a lightweight and easy to use CPU temperature monitoring tool for Windows 10, you need to give Core Temp a try. It’s a lightweight tool that runs in your system tray and continuously monitors the CPU temperature. It also adds a CPU temperature meter on the System tray.
4. HWMonitor
HWMonitor is one of the most advanced CPU monitoring tools available out there, which shows the current temperature of the Motherboard, Graphics card, CPU, and Hard drive. Not only that, but it also displays the CPU loads in real-time as well. However, the tool is a little bit advanced, and the reports are quite complicated to understand. So, if you have any technical knowledge regarding how the core works, then HWMonitor might be the best pick for you.
5. SpeedFan
SpeedFan is a full-fledged system monitor tool for Windows 10. It’s a program that monitors voltages, fan speeds, and temperature of CPU and GPU. Apart from that, SpeedFan also got the ability to acess the S.M.A.R.T information to show you the hard disk temperature. Overall, SpeedFan is a great tool to monitor CPU temperature in Windows 10.
6. Speccy
Speccy is basically a system management tool that also checks for software updates. Apart from that, the advanced section of Speccy also shows the real-time CPU temperature. The software works on both 32 bit and 64-but computers, and it’s one of the best CPU monitoring tools available out there.
7. HWiNFO
HWiNFO is one of the best free professional system monitoring and diagnostic tool available out there. The software is known for its comprehensive hardware analysis, monitoring, and reporting for Windows and DOS. HWiNFO shows everything, including your CPU information, GPU Information, current speed, voltage, temperature, etc.
8. Game Assistant 2
Well, Game Assistant 2 is software meant to optimize the gaming performance of your system. The software reports about the RAM usage, the CPU’s current temperature, fan speed, etc. So, Game Assistant 2 shows all the information needed to keep an eye on your system and monitor the level of exertion you are putting on your computer.
9. AIDA64
AIDA64 doesn’t analyze every part of your computer, nor it shows an extremely detailed report. However, it shows the most relevant details that were required for proper system monitoring. With AIDA64, you can quickly check the temperature of your PC’s motherboard, CPU, PCH, GPU, SSD, etc. Compared to all other tools, the reports of AIDA64 is easy to understand.
10. ASUS AI Suite
If you are using an ASUS computer or laptop, ASUS AI Suite might be the best pick. With ASUS AI Suite, you can quickly check your CPU temperature in real-time. The ASUS AI Suite is meant to underclock and overclock the CPU. Apart from that, the ASUS AI Suite can also be used to optimize the CPU settings to provide the best performance.
So, these are the ten best CPU monitoring tools that you can use right now. If you know any other such software, let us know in the comment box below. I hope this article helped you! Please share it with your friends also.
The post 10 Best CPU Temperature Monitor Tools For Windows appeared first on TechViral.
from TechViral https://ift.tt/2M2Vu1V
No comments:
Post a Comment